NYLON6+GF-Dupont-Zytel 73G15L NC010
Product Information
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry
| General information | Value | Unit | Test Standard |
| Resin Identification | PA6-GF15 | – | – |
| Part Marking Code | >PA6-GF15< | – | ISO 11469 |
| Rheological properties | dry / cond | Unit | Test Standard |
| Viscosity number | 150 / * | cm³/g | ISO 307, 1157, 1628 |
| Moulding shrinkage, parallel | 0.3 / * | % | ISO 294-4, 2577 |
| Moulding shrinkage, normal | 0.8 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile Modulus | 6000 / 3500 | MPa | ISO 527-1/-2 |
| Stress at break | 135 / 72 | MPa | ISO 527-1/-2 |
| Strain at break | 4 / 10 | % | ISO 527-1/-2 |
| Flexural Modulus | 5000 / – | MPa | ISO 178 |
| Charpy impact strength
23°C |
50 / 95 |
kJ/m² |
ISO 179/1eU |
| -30°C | 45 / 54 | kJ/m² | |
| Charpy notched impact strength
23°C |
7 / 15 |
kJ/m² |
ISO 179/1eA |
| -30°C | 6 / 14 | kJ/m² | |
| -40°C | 6 / – | kJ/m² | |
| Izod notched impact strength
23°C |
6 / 12 |
kJ/m² |
ISO 180/1A |
| -30°C | 5 / – | kJ/m² | |
| -40°C | 5 / – | kJ/m² | |
| Izod impact strength
23°C |
45 / – |
kJ/m² |
ISO 180/1U |
| -40°C | 40 / – | kJ/m² | |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 221 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load
1.8 MPa |
200 / * |
°C |
ISO 75-1/-2 |
| 0.45 MPa | 220 / * | °C | |
| Vicat softening temperature, 50°C/h, 50N | 215 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 37 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 109 / * | E-6/K | ISO 11359-1/-2 |
| Thermal conductivity of melt | 0.19 | W/(m K) | – |
| Spec. heat capacity of melt | 2470 | J/(kg K) | – |
| RTI, electrical, 1.5mm | 65 / * | °C | UL 746B |
| RTI, impact, 1.5mm | 65 / * | °C | UL 746B |
| RTI, strength, 1.5mm | 65 / * | °C | UL 746B |
Specification: NYLON6+GF-Dupont-Zytel 73G15L NC010
|
There are no reviews yet.