ASA+PC-CHIMEI-ABS 540 V0
@ Plastic Dealer Ask owner
| PROPERTIES | CONDITION | VALUE | UNIT | METHOD |
| PHYSICAL | ||||
| Specific Gravity | 23℃ | 1.18 | ISO 2039 | |
| Melt Volume-Flow Rate | 260℃/2.16kg | 20 | cm3/10min | ISO 1133 |
| Spiral flow length | 260℃,2mm
V:50%, P:50% |
40 | cm | Chimei method |
| Mold Shrinkage | 0.4~0.6 | % | ISO 2577 | |
| Rockwell Hardness | 23℃ | R-119 | — | ASTM D-785 |
| CLTE | Flow:23-55℃ | 8.00E-05 | cm/cm/℃ | ISO11359-2 |
| MECHANICAL | ||||
| Tensile Strength @ Yield | 50mm/min | 60 | Mpa | ISO 527 |
| Tensile Strength @ break | 50mm/min | 55 | Mpa | ISO 527 |
| Tensile Elongation @ Break | 50mm/min | 120 | % | ISO 527 |
| Flexural Strength | 2mm/min | 90 | Mpa | ISO 178 |
| Flexural Modulus | 2mm/min | 2500 | Mpa | ISO 178 |
| Izod Impact（3.2mm） | Notched, 23℃ | 40 | kJ/m2 | ISO 180 |
| Izod Impact（3.2mm） | Notched, -30℃ | 12 | kJ/m2 | ISO 180 |
| Charpy Impact（3.2mm） | Notched, 23℃ | 40 | kJ/m2 | ISO 179 |
| Charpy Impact（3.2mm） | Notched, -30℃ | 12 | kJ/m2 | ISO 179 |
| THERMAL | ||||
| Heat Distortion Temp.（unannealed） | 4mm,1.82Mpa
120℃/hr |
83 | ℃ | ISO 75 |
| Vicat Softening Temp.（unannealed） | 1kg, 50℃/hr 5kg, 50℃/hr | 107
101 |
℃ | ISO 306 |
| ELECTRICAL | ||||
| Dielectric Constant | 1MHz | 3.1 | — | IEC 60250 |
| Volume Resistivity | — | 3.9E+15 | Ohm*m | IEC 60093 |
| Surface Resistivity | — | 2.9E+15 | Ohm | IEC 60093 |
| FLAMMABILITY | ||||
| Flame Rating | 1.5mm V0 | UL-94 | ||
| 2.0mm 5VB | UL-94 |
Specification: ASA+PC-CHIMEI-ABS 540 V0
|
There are no reviews yet.