MECHANICAL
Impact Strength, Izod
| notched 1/8 in (3.2 mm) section | 1.3 ft-lbs/in | 69 J/m | D 256 |
| unnotched 1/8 in (3.2 mm) section | 17.0 ft-lbs/in | 908 J/m | D 4812 |
| Tensile Strength | 6500 psi | 45 MPa | D 638 |
| Tensile Elongation | > 10.0 % | > 10.0 % | D 638 |
| Tensile Modulus | 0.22 x 10^6 psi | 1517 MPa | D 638 |
| Flexural Strength | 8200 psi | 57 MPa | D 790 |
| Flexural Modulus | 0.27 x 10^6 psi | 1862 MPa | D 790 |
| ELECTRICAL | |||
| Volume Resistivity | 1E2 – 1E6 ohm.cm | 1E2 – 1E6 ohm.cm | D 257 |
| Surface Resistivity | < 1E7 ohm/sq | < 1E7 ohm/sq | D 257 |
| Surface Resistance | < 1E6 ohm | < 1E6 ohm | ESD STM11.11
ESD STM11.11 |
| Static Decay
MIL-PRF-81705D, 5kV to 50 V, 12% RH |
< 2.00 s | < 2.00 s | FTMS101C |
| 4046.1 | |||
| THERMAL | |||
| Ignition Resistance* Flammability |
HB @ 1/16 in |
HB @ 1.5 mm |
UL94 |
| GENERAL PROCESSING FOR INJECTION MOLDING |
English |
SI Metric |
|
| Injection Pressure Melt Temperature Mold Temperature Drying
Moisture Content Dew Point |
10000 – 15000 psi 360 – 425 °F 175 – 225 °F 2 hrs @ 250 °F 0.15 % -25 °F |
69 – 103 MPa 182 – 218 °C 79 – 107 °C 2 hrs @ 121 °C 0.15 % -32 °C |
|
| PROCESSING NOTES | |||
| Desiccant Type Dryer Required. |
Specification: POM-RTP-ESD 800 HB
|
There are no reviews yet.