Pixel ID: 1720849011656943

ABS-CHIMEI-777D

Add to compare
Sold by
@ Plastic Dealer

Report Abuse
Processing/Physical Characteristics Value Unit Test Standard
ISO Data
Melt volume-flow rate, MVR 5.5 cm³/10min ISO 1133
Temperature 220 °C
Load 10 kg
Molding shrinkage, parallel 0.5 % ISO 294-4, 2577
ASTM Data
Melt Flow Index, MFI 5.5 g/10min ASTM D 1238
Temperature 220 °C
Load 10 kg
Mechanical properties Value Unit Test Standard
ISO Data
Yield stress 43 MPa ISO 527
Stress at break 33 MPa ISO 527
Flexural modulus, 23°C 2300 MPa ISO 178
Flexural strength 73 MPa ISO 178
Charpy notched impact strength, +23°C 14 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 7 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 13 kJ/m² ISO 180/1A
Izod notched impact strength 7 kJ/m² ISO 180/1A
Temperature -30 °C
ASTM Data
Tensile Strength at Yield 44 MPa ASTM D 638
Flexural Modulus 2206 MPa ASTM D 790
Flexural Strength 66.5 MPa ASTM D 790
Rockwell Hardness R 115 ASTM D 785
Izod Impact notched, 1/8 in 171 J/m ASTM D 256
Izod Impact notched, 1/4 in 139 J/m ASTM D 256
Thermal properties Value Unit Test Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 97 °C ISO 75-1/-2
Vicat softening temperature, A 124 °C ISO 306
Vicat softening temperature, B 117 °C ISO 306
Coeff. of linear therm. expansion, parallel 83 E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm
Yellow Card available yes
ASTM Data
UL 94 Flame rating HB UL 94
Thickness tested 1.5 mm
DTUL @ 264 psi 105 °C ASTM D 648
Vicat Temperature 125 °C ASTM D 1525
Electrical properties Value Unit Test Standard
ASTM Data
Arc Resistance 30 s ASTM D 495
Other properties Value Unit Test Standard
Density 1060 kg/m³ ISO 1183
Density 1060 kg/m³ ASTM D 792
Processing Recommendation Injection Molding Value Unit Test Standard
Pre-drying – Temperature 90 – 105 °C
Pre-drying – Time 3 h
Mold temperature 30 – 70 °C
Feed temperature 220 – 240 °C
Zone 1 230 – 250 °C
Nozzle temperature 230 – 250 °C
Injection pressure 5 – 7 MPa
Back pressure 0.5 – 1.5 MPa
Holding pressure 4 – 6 MPa
Characteristics

Specification: ABS-CHIMEI-777D

ALPHA

C

Group

ABS

Class

ABS

Color

Natural

DENSITY

1.06

GRADE

777D

NOTES

ABS

Special Properties

Heat resistance grade, Superheat resistance, impact strength

Typical Applications

Heating appliances shell, dry hair blow hair-dryer, iron shell, fan heater, auto parts, water tank cover

Country

Taiwan

Tds-Name

PolylacPA777D-MDS-EN.pdf

Tds-Url

https://www.materialdatacenter.com/ms/en/tradenames/Polylac/Chi+Mei+Corporation/POLYLAC+PA-777D/6ef16fac/544

D-Type

X

Brand

C>CHIMEI

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “ABS-CHIMEI-777D”

Your email address will not be published. Required fields are marked *

Add to compare
PP-CP-BASELL-EP400M
Add to compare
LL MDPE-BOROUGE-FK2715
Add to compare
LL FILM-GAIL-F20S009A
Add to compare
LD FILM-BASELL-LF2207X
Add to compare
PP FILM-HMEL-F03RR

Product Enquiry

Plastic Dealers
Logo
Reset Password
Compare items
  • Total (0)
Compare
0
Shopping cart