MECHANICAL
Impact Strength, Izod
| notched 1/8 in (3.2 mm) section | 0.9 ft-lbs/in | 48 J/m | D 256 |
| unnotched 1/8 in (3.2 mm) section | 2.5 ft-lbs/in | 133 J/m | D 4812 |
| Tensile Strength | 12500 psi | 86 MPa | D 638 |
| Tensile Elongation | 0.5 – 1.5 % | 0.5 – 1.5 % | D 638 |
| Tensile Modulus | 1.90 x 10^6 psi | 13100 MPa | D 638 |
| Flexural Strength | 17000 psi | 117 MPa | D 790 |
| Flexural Modulus | 1.75 x 10^6 psi | 12066 MPa | D 790 |
| ELECTRICAL | |||
| Volume Resistivity | 1000 – 9.9E+09 ohm.cm | 1000 – 9.9E+09 ohm.cm |
D 257 |
| Surface Resistivity | 1.0E+5 – 9.9E+11 ohm/sq | 1.0E+5 – 9.9E+11 ohm/sq | D 257 |
| Surface Resistance | 1.0E+4 – 9.9E+10 ohm | 1.0E+4 – 9.9E+10 ohm | ESD STM11.11 |
| Static Decay
MIL-PRF-81705D, 5kV to 50 V, 12% RH |
< 2.00 s |
< 2.00 s |
FTMS101C |
| 4046.1 | |||
| THERMAL | |||
| Deflection Temperature @ 264 psi (1820 kPa) | 510 °F | 266 °C | D 648 |
| GENERAL PROCESSING FOR INJECTION MOLDING |
English |
SI Metric |
|
Injection Pressure |
10000 – 15000 psi |
69 – 103 MPa |
| Melt Temperature | 585 – 625 °F | 307 – 329 °C |
| Mold Temperature | 275 – 350 °F | 135 – 177 °C |
| Drying | 6 hrs @ 300 °F | 6 hrs @ 149 °C |
| Moisture Content | 0.04 % | 0.04 % |
| PROCESSING NOTES |
Specification: PPS-RTP-ESD A 1305
|
There are no reviews yet.