Product Description
Moplen EP332K is a polypropylene impact copolymer with an optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage and good thermal ageing stability. Typical customer applications are injection molding of toys, crates, appliances housing, and general housewares.
Regulatory Status
For regulatory compliance information, see Moplen EP332K Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS).
Status Commercial: Active
Availability Africa-Middle East; Asia-Pacific; Australia and New Zealand
Application Crates; Housewares; Opaque Containers; Small Appliances; Sports, Leisure & Toys Market Consumer Products; Electrical / Electronics
Processing Method Injection Molding
Attribute Good Heat Aging Resistance; Good Impact Resistance; Good Toughness; High Stiffness; Impact Copolymer
|
Typical Properties |
Nominal
Value |
Units |
Test Method |
| Physical | |||
| Melt Flow Rate, (230 °C/2.16 kg) | 5 | g/10 min | ASTM D1238 |
| Density | 0.90 | g/cm³ | ASTM D792 |
| Mechanical | |||
| Flexural Modulus | 1150 | MPa | ASTM D790 |
| Tensile Strength at Yield | 25 | MPa | ASTM D638 |
| Tensile Elongation at Yield | 9 | % | ASTM D638 |
| Impact | |||
| Notched Izod Impact Strength, (23 °C) | 150 | J/m | ASTM D256 |
| Thermal | |||
| Deflection Temperature Under Load, (0.46 N/mm²) | 88 | °C | ASTM D648 |
Specification: PP-CP-BASELL-EP332K
|
User Reviews
Be the first to review “PP-CP-BASELL-EP332K”
Vendor Information
- No ratings found yet!
There are no reviews yet.