NYLON66+GF DP AKV 30 FN00 LANXESS granuals Delhi plastic Dealer, Importer

Property Rheological properties	Test Condition	Unit	Standard	guide value 1 d.a.m.	cond.
Molding shrinkage, parallel	150x105x3; 290 °C / MT 80 °C; 400 bar	%	acc. ISO 2577	0.35
Molding shrinkage, transverse	150x105x3; 290 °C / MT 80 °C; 400 bar	%	acc. ISO 2577	1.46
Post- shrinkage, parallel	150x105x3; 120 °C; 4 h	%	acc. ISO 2577	0.04
Post- shrinkage, transverse	150x105x3; 120 °C; 4 h	%	acc. ISO 2577	0.05
Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus	1 mm/min	MPa	ISO 527-1,-2	10600		7000
C Tensile Stress at break	5 mm/min	MPa	ISO 527-1,-2	185		125
C Tensile Strain at break	5 mm/min	%	ISO 527-1,-2	3.0		6.0
C Charpy impact strength	23 °C	kJ/m²	ISO 179-1eU	90		90
C Charpy impact strength	-30 °C	kJ/m²	ISO 179-1eU	70		70
C Charpy notched impact strength	23 °C	kJ/m²	ISO 179-1eA	10		15
C Charpy notched impact strength	-30 °C	kJ/m²	ISO 179-1eA	10		10
Izod notched impact strength	-30 °C	kJ/m²	ISO 180-1A	< 10		< 10
Izod notched impact strength	-40 °C	kJ/m²	ISO 180-1A	< 10		< 10
Flexural modulus	2 mm/min	MPa	ISO 178-A	8400		5900
Flexural strength	2 mm/min	MPa	ISO 178-A	290		200
Flexural strain at flexural strength	2 mm/min	%	ISO 178-A	4.0		6.0
Flexural stress at 3.5 % strain	2 mm/min	MPa	ISO 178-A			165
Ball indentation hardness		N/mm²	ISO 2039-1	230		130
Thermal properties
C Melting temperature	10 °C/min	°C	ISO 11357-1,-3	263
C Temperature of deflection under load	1.80 MPa	°C	ISO 75-1,-2	250
C Temperature of deflection under load	0.45 MPa	°C	ISO 75-1,-2	250
C Temperature of deflection under load	8.00 MPa	°C	ISO 75-1,-2	135
Vicat softening temperature	50 N; 120 °C/h	°C	ISO 306	> 230
C Coefficient of linear thermal expansion, parallel	23 to 55 °C	10-4/K	ISO 11359-1,-2	0.25
C Coefficient of linear thermal expansion, transverse	23 to 55 °C	10-4/K	ISO 11359-1,-2	1.0
C Burning behavior UL 94	1.5 mm	Class	UL 94	HB
C Oxygen index	Method A	%	ISO 4589-2	23
Glow wire test (GWFI)	2.0 mm	°C	IEC 60695-2-12	600
Electrical properties (23 °C/50 % r. h.)
C Relative permittivity	100 Hz	–	IEC 60250	4.0		10
C Relative permittivity	1 MHz	–	IEC 60250	4.0		4.0
C Dissipation factor 100 Hz 10-4 IEC 60250				90	2700
C Dissipation factor 1 MHz 10-4 IEC 60250				180	800
C Volume resistivity		Ohm·m	IEC 60093	1E13	1E10
C Surface resistivity		Ohm	IEC 60093	1E14	1E13
C Electric strength	1 mm	kV/mm	IEC 60243-1	40	35

Specification: NYLON66+GF-LANXESS-DP AKV 30 FN00

ALPHA	L
Group	NYLON
Class	NYLON66+GF
DENSITY	1.42
GRADE	DP AKV 30 FN00
NOTES	PA(Nylon)66+30%GF
Special Properties	PA 66, 30 % glass fibers, injection molding, halogen-free flame retardan
Additives	NYLON66+30%GF
Country	Italy
Brand	L>LANXESS
Tds-Name	3679_pa66durethanakv30fn00.pdf
Tds-Url	https://plastore.it/cgi2018/file818/3679_pa66durethanakv30fn00.pdf
D-Type	X