ABS MOULDING-BASF-Terluran GP-22
@ Plastic Dealer Ask owner
Properties
| Polymer abbreviation | – | ABS |
| Density | ISO 1183 g/cm³ | 1.04 |
| Melt volume-flow rate MVR 220 °C / 10kg | ISO 1133 cm³/10min | 19 |
| Water absorption, equilibrium in water at 23°C | similar to ISO 62 % | 1 |
| Moisture absorption, equilibrium 23°C/50% r. h. | similar to ISO 62 % | 0.22 |
| Moulding shrinkage, free, longitudinal | – % | 0.4 – 0.7 |
| UL94 rating at 1.6mm thickness | (E41871) | UL 94 | class | HB |
| Automotive materials (thickness d>1mm) | FMVSS 302 | – | + | |
| Tensile modulus | ISO 527-1/-2 MPa | 2300 | |
| Yield stress ( 50 mm/min ) | ISO 527-1/-2 MPa | 45 | |
| Yield strain ( 50 mm/min ) | ISO 527-1/-2 % | 2.6 | |
| Nominal strain at break ( 50 mm/min ) | ISO 527-1/-2 % | 10 | |
| Flexural strength | ISO 178 MPa | 65 | |
| Charpy impact strength | (+ 23°C) | ISO 179/1eU kJ/m² | 180 |
| Charpy impact strength | (- 30°C) | ISO 179/1eU kJ/m² | 100 |
| Izod notched impact strength | (+ 23°C) | ISO 180/A kJ/m² | 26 |
| Izod notched impact strength | (- 30°C) | ISO 180/A kJ/m² | 8 |
| Charpy notched impact strength | (+ 23°C) | ISO 179/1eA kJ/m² | 22 |
| Charpy notched impact strength | (-30°C) | ISO 179/1eA kJ/m² | 8 |
| Izod notched impact strength, method A | (+23°C) | ASTM D 256 J/m | 300 |
| Ball indentation hardness at 358 N/30 s | ISO 2039-1 MPa | 97 |
| HDT A (1.80 MPa) / HDT B ( 0.45 MPa ) | ISO 75-1/-2 | °C | 80 / 92 |
| Vicat softening temperature VST/A/50 / VST/B/50 | ISO 306 | °C | 105 / 96 |
| Max. service temperature (short cycle operation) | – | °C | 80 |
| Coefficient of linear therm. expansion, longit. (23-80)°C | ISO 11359-1/-2 | 10-4/°C | 0.8 – 1.1 |
| Thermal conductivity | DIN 52612-1 | W/(m•K) | 0.17 |
| Relative permittivity at 100 Hz / 1 MHz | IEC 60250 | – | 2.9 / 2.8 |
| Dissipation factor at 100 Hz / 1 MHz | IEC 60250 | 10-4 | 48 / 79 |
| Volume resistivity | IEC 60093 | Ω • m | 1013 |
| Surface resistivity | IEC 60093 | Ω | 1013 |
| Electric strength K20/P50, d = 0.6 – 0.8 mm | IEC 60243-1 | kV/mm | 37 |
| CTI, test liquid A | IEC 60112 | – | 600 |
| CTIM, test liquid B | IEC 60112 | – | 225 |
Specification: ABS MOULDING-BASF-Terluran GP-22
|
There are no reviews yet.