| Property |
Test Condition |
Unit |
Standard |
guide value 1 |
|
| |
|
|
|
d.a.m. cond. |
| Glow wire test (GWFI) |
2.0 mm |
°C |
IEC 60695-2-12 |
750 |
| Burning behavior US-FMVSS302 |
>=1.0 mm |
|
ISO 3795 |
passed |
|
| C Vicat softening temperature |
50 N; 50 °C/h |
°C |
ISO 306 |
200 |
|
| Electrical properties (23 °C/50 % r. h.) |
|
|
|
|
|
| C Relative permittivity |
100 Hz |
– |
IEC 60250 |
4.0 |
15 |
| C Relative permittivity |
1 MHz |
– |
IEC 60250 |
3.5 |
4.0 |
| C Dissipation factor 100 Hz 10-4 IEC 60250 |
170 |
2000 |
| C Dissipation factor 1 MHz 10-4 IEC 60250 |
200 |
1200 |
| C Volume resistivity |
|
Ohm·m |
IEC 60093 |
1E13 |
1E10 |
| C Surface resistivity |
|
Ohm |
IEC 60093 |
1E14 |
1E13 |
| C Electric strength |
1 mm |
kV/mm |
IEC 60243-1 |
30 |
30 |
| C Comparative tracking index CTI |
Solution A |
Rating |
IEC 60112 |
600 |
|
| Comparative tracking index CTI M |
Solution B |
Rating |
IEC 60112 |
600 M |
|
| Other properties (23 °C) |
|
|
|
|
|
| C Water absorption (Saturation value) |
Water at 23 °C |
% |
ISO 62 |
10 |
|
| C Water absorption (Equilibrium value) |
23 °C; 50 % RH |
% |
ISO 62 |
3 |
|
| C Density |
|
kg/m³ |
ISO 1183 |
1140 |
|
| Bulk density |
|
kg/m³ |
ISO 60 |
700 |
|
| Processing conditions for test specimens |
|
|
|
|
|
| C Injection molding-Melt temperature |
|
°C |
ISO 294 |
270 |
|
| C Injection molding-Mold temperature |
|
°C |
ISO 294 |
80 |
|
| Processing recommendations |
|
|
|
|
|
| Drying temperature dry air dryer |
|
°C |
– |
80 |
|
| Drying time dry air dryer |
|
h |
– |
2-6 |
|
| Residual moisture content |
|
% |
Acc. to Karl Fischer |
0.03-0.12 |
|
| Melt temperature (Tmin – Tmax) |
|
°C |
– |
260-280 |
|
| Mold temperature |
|
°C |
– |
80-100 |
|
There are no reviews yet.