Product Description
Lupolen 2420 D is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading to a good bubble stability during blown film extrusion. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications. Regulatory Status
For regulatory compliance information, see Lupolen 2420D Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS).
Status Commercial: Active
Availability Africa-Middle East; Asia-Pacific; Europe
Application Agriculture Film; Bags & Pouches; Heavy Duty Packaging; Liner Film; Shrink Film; Stretch Hood
Market Flexible Packaging
Processing Method Blown Film
Attribute General Purpose; Good Processability; Good Tear Strength; Good Toughness
Typical Properties |
Nominal
Value |
Units |
Test Method |
Physical | |||
Melt Flow Rate, (190 °C/2.16 kg) | 0.25 | g/10 min | ISO 1133-1 |
Density | 0.923 | g/cm³ | ISO 1183-1 |
Mechanical | |||
Tensile Modulus | 260 | MPa | ISO 527-1, -2 |
Tensile Stress at Yield | 10 | MPa | ISO 527-1, -2 |
Film | |||
Dart Drop Impact Strength, F50 | 250 | g | ASTM D1709 |
Tensile Strength | |||
MD | 27 | MPa | ISO 527-1, -3 |
TD | 25 | MPa | ISO 527-1, -3 |
Tensile Strain at Break | |||
MD | 200 | % | ISO 527-1, -3 |
TD | 500 | % | ISO 527-1, -3 |
Coefficient of Friction | >0.8 | ISO 8295 |
Impact
Failure Energy 6.5 J/mm DIN 53373 Film thickness: 70 µm
Thermal
Vicat Softening Temperature, (A/50 N) | 96 °C | ISO 306 |
Peak Melting Point | 110 °C | ISO 3146 |
Specification: LD HEAVY-BASELL-2420D
|
There are no reviews yet.