Versaflex™ OM 9-802CL is a clear, soft touch TPE designed to bond to the following thermoplastics: PC, ABS, PC/ABS and copolyester.
New Product. Commercial specifications have not been established.
- Excellent Adhesion to PC, ABS, PC/ABS, Copolyester
- Soft Touch Feel
- Water Clarity
| Technical Properties 1 | |||
| Physical | Typical Value (English) | Typical Value (SI) | Test Method |
| Specific Gravity | 0.930 | 0.928 g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR)
190°C/2.16 kg |
24 g/10 min |
24 g/10 min |
ASTM D1238 |
| 200°C/5.0 kg | 100 g/10 min | 100 g/10 min | |
| Molding Shrinkage – Flow | 0.0040 to 0.011 in/in | 0.40 to 1.1 % | ASTM D955 |
| Elastomers | Typical Value (English) | Typical Value (SI) | Test Method |
| Tensile Stress 2, 3
100% Strain, 73°F (23°C) |
230 psi |
1.59 MPa |
ASTM D412 |
| 300% Strain, 73°F (23°C) | 310 psi | 2.14 MPa | |
| Tensile Strength 2, 3 (Break, 73°F (23°C)) | 930 psi | 6.41 MPa | ASTM D412 |
| Tensile Elongation 2, 3 (Break, 73°F (23°C)) | 1100 % | 1100 % | ASTM D412 |
| Tear Strength | 140 lbf/in | 24.5 kN/m | ASTM D624 |
| Compression Set
73°F (23°C), 22.0 hr |
20 % |
20 % |
ASTM D395B |
| 158°F (70°C), 22.0 hr | 99 % | 99 % | |
| Hardness | Typical Value (English) | Typical Value (SI) | Test Method |
| Durometer Hardness (Shore A, 10 sec) | 40 | 40 | ASTM D2240 |
| Fill Analysis | Typical Value (English) | Typical Value (SI) | Test Method |
| Apparent Viscosity
392°F (200°C), 11200 sec^-1 |
16.0 Pa·s |
16.0 Pa·s |
ASTM D3835 |
Specification: TPE-PolyOne-GLS Versaflex OM 9-802CL
|
There are no reviews yet.