PC Colorfast PC200 LTL granuals Delhi plastic Dealer, Importer

PC-LTL-Colorfast PC200

Add to compare

Product Description

20 melt superior processing, fast cycling

Physical	Nominal Value (English)	Nominal Value (SI)	Test Method
Specific Gravity	1.20	1.20 g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	20 g/10 min	20 g/10 min	ASTM D1238
Molding Shrinkage – Flow (0.125 in (3.18 mm))	5.0E-3 to 7.0E-3 in/in	0.50 to 0.70 %	ASTM D955
Mechanical	Nominal Value (English)	Nominal Value (SI)	Test Method
Tensile Strength ³			ASTM D638
Yield	9000 psi	62.1 MPa
Break	9500 psi	65.5 MPa
Tensile Elongation ³			ASTM D638
Yield	6.0 %	6.0 %
Break	120 %	120 %
Flexural Modulus ³	335000 psi	2310 MPa	ASTM D790
Flexural Strength ³	13500 psi	93.1 MPa	ASTM D790
Impact	Nominal Value (English)	Nominal Value (SI)	Test Method
Notched Izod Impact (73°F (23°C))	12 ft·lb/in	640 J/m	ASTM D256
Hardness	Nominal Value (English)	Nominal Value (SI)	Test Method
Rockwell Hardness (M-Scale)	70	70	ASTM D785
Thermal	Nominal Value (English)	Nominal Value (SI)	Test Method
Deflection Temperature Under Load			ASTM D648
264 psi (1.8 MPa), Unannealed, 0.250 in (6.35
mm)
Injection	Nominal Value (English)	Nominal Value (SI)
Drying Temperature	250 °F	121 °C
Drying Time	3.0 to 4.0 hr	3.0 to 4.0 hr
Drying Time, Maximum	48 hr	48 hr
Suggested Shot Size	40 to 60 %	40 to 60 %
Rear Temperature	480 to 520 °F	249 to 271 °C
Middle Temperature	500 to 540 °F	260 to 282 °C
Front Temperature	520 to 560 °F	271 to 293 °C
Nozzle Temperature	510 to 550 °F	266 to 288 °C
Processing (Melt) Temp	520 to 560 °F	271 to 293 °C
Mold Temperature	160 to 200 °F	71.1 to 93.3 °C
Back Pressure	50.0 to 100 psi	0.345 to 0.689 MPa
Screw Speed	40 to 70 rpm	40 to 70 rpm
Vent Depth	1.0E-3 to 3.0E-3 in	0.025 to 0.076 mm

Specification: PC-LTL-Colorfast PC200

ALPHA	L
Group	PC
Class	PC
DENSITY	1.2
GRADE	Colorfast PC200
NOTES	PC
Country	China,
Tds-Name	PCColorfastPC200.pdf
Tds-Url	https://upmold.com/wp-content/uploads/data-sheet/PCColorfastPC200.pdf
D-Type	X
Brand	L>LTL