Rheological properties
| Melt volume-flow rate |
300 °C; 1.2 kg |
cm³/10 min |
ISO 1133 |
9.0 |
| Molding shrinkage, parallel |
60x60x2 mm; 500 bar |
% |
ISO 294-4 |
0.65 |
| Molding shrinkage, normal |
60x60x2 mm; 500 bar |
% |
ISO 294-4 |
0.7 |
| Molding shrinkage, parallel/normal |
Value range based on general
practical experience |
% |
b.o. ISO 2577 |
0.6 – 0.8 |
| Melt mass-flow rate |
300 °C; 1.2 kg |
g/10 min |
ISO 1133 |
10 |
Mechanical properties (23 °C/50 % r. h.)
| Tensile modulus |
1 mm/min |
MPa |
ISO 527-1,-2 |
2400 |
| Yield stress |
50 mm/min |
MPa |
ISO 527-1,-2 |
66 |
| Yield strain |
50 mm/min |
% |
ISO 527-1,-2 |
6.2 |
| Nominal strain at break |
50 mm/min |
% |
ISO 527-1,-2 |
> 50 |
| Stress at break |
50 mm/min |
MPa |
ISO 527-1,-2 |
70 |
| Strain at break |
50 mm/min |
% |
b.o. ISO 527-1,-2 |
130 |
| Tensile creep modulus |
1 h |
MPa |
ISO 899-1 |
2200 |
| Tensile creep modulus |
1000 h |
MPa |
ISO 899-1 |
1900 |
| Flexural modulus |
2 mm/min |
MPa |
ISO 178 |
2400 |
| Flexural strength |
2 mm/min |
MPa |
ISO 178 |
97 |
| Flexural strain at flexural strength |
2 mm/min |
% |
ISO 178 |
7.1 |
| Flexural stress at 3.5 % strain |
2 mm/min |
MPa |
ISO 178 |
73 |
| Charpy impact strength |
23 °C |
kJ/m² |
ISO 179-1eU |
N |
| Charpy impact strength |
-30 °C |
kJ/m² |
ISO 179-1eU |
N |
| Charpy impact strength |
-60 °C |
kJ/m² |
ISO 179-1eU |
N |
| Charpy notched impact strength |
23 °C; 3 mm |
kJ/m² |
ISO 7391/b.o. ISO
179-1eA |
75P |
| Charpy notched impact strength |
-30 °C; 3 mm |
kJ/m² |
ISO 7391/b.o. ISO
179-1eA |
16C |
| Izod notched impact strength |
23 °C; 3 mm |
kJ/m² |
ISO 7391/b.o. ISO 180-A |
70P |
| Izod notched impact strength |
-30 °C; 3 mm |
kJ/m² |
ISO 7391/b.o. ISO 180-A |
15C |
| Puncture maximum force |
23 °C |
N |
ISO 6603-2 |
5400 |
| Puncture maximum force |
-30 °C |
N |
ISO 6603-2 |
6300 |
| Puncture energy |
23 °C |
J |
ISO 6603-2 |
60 |
| Puncture energy |
-30 °C |
J |
ISO 6603-2 |
65 |
| Ball indentation hardness |
|
N/mm² |
ISO 2039-1 |
115 |
| Glass transition temperature |
10 °C/min |
°C |
ISO 11357-1,-2 |
145 |
| Temperature of deflection under load |
1.80 MPa |
°C |
ISO 75-1,-2 |
125 |
| Temperature of deflection under load |
0.45 MPa |
°C |
ISO 75-1,-2 |
137 |
| Vicat softening temperature |
50 N; 50 °C/h |
°C |
ISO 306 |
144 |
| Vicat softening temperature |
50 N; 120 °C/h |
°C |
ISO 306 |
146 |
| Coefficient of linear thermal expansion, parallel |
23 to 55 °C |
10-4/K |
ISO 11359-1,-2 |
0.65 |
| Coefficient of linear thermal expansion, transverse |
23 to 55 °C |
10-4/K |
ISO 11359-1,-2 |
0.65 |
| Burning behavior UL 94 [UL recognition] |
0.75 mm |
Class |
UL 94 |
V-2 |
| Burning behavior UL 94 [UL recognition] |
2.5 mm |
Class |
UL 94 |
HB |
| Oxygen index |
Method A |
% |
ISO 4589-2 |
28 |
| Thermal conductivity, cross-flow |
23 °C; 50 % r. h. |
W/(m·K) |
ISO 8302 |
0.20 |
| Resistance to heat (ball pressure test) |
|
°C |
IEC 60695-10-2 |
136 |
| Relative temperature index (Tensile strength) [UL recognition] |
1.5 mm |
°C |
UL 746B |
125 |
| Relative temperature index (Tensile impact strength) [UL recognition] |
1.5 mm |
°C |
UL 746B |
115 |
| Relative temperature index (Electric strength) [UL recognition] |
1.5 mm |
°C |
UL 746B |
125 |
| Glow wire test (GWFI) |
0.75 mm |
°C |
IEC 60695-2-12 |
850 |
| Glow wire test (GWFI) |
1.5 mm |
°C |
IEC 60695-2-12 |
850 |
| Glow wire test (GWFI) |
3.0 mm |
°C |
IEC 60695-2-12 |
930 |
| Glow wire test (GWIT) |
0.75 mm |
°C |
IEC 60695-2-13 |
875 |
| Glow wire test (GWIT) |
1.0 mm |
°C |
IEC 60695-2-13 |
875 |
| Glow wire test (GWIT) |
1.5 mm |
°C |
IEC 60695-2-13 |
875 |
| Glow wire test (GWIT) |
3.0 mm |
°C |
IEC 60695-2-13 |
900 |
| Glow wire test |
1.5 mm |
°C |
b.o. EDF HN60 E.02 |
750 |
| Glow wire test |
3.0 mm |
°C |
b.o. EDF HN60 E.02 |
750 |
| Application of flame from small burner |
Method K and F; 2.0 mm |
Class |
DIN 53438-1,-3 |
K1, F1 |
| Needle flame test |
Method K; 1.5 mm |
s |
IEC 60695-11-5 |
5 |
| Needle flame test |
Method K; 2.0 mm |
s |
IEC 60695-11-5 |
5 |
| Needle flame test |
Method K; 3.0 mm |
s |
IEC 60695-11-5 |
10 |
| Needle flame test |
Method F; 1.5 mm |
s |
IEC 60695-11-5 |
60 |
| Needle flame test |
Method F; 2.0 mm |
s |
IEC 60695-11-5 |
60 |
| Needle flame test |
Method F; 3.0 mm |
s |
IEC 60695-11-5 |
120 |
| Burning rate (US-FMVSS) |
>=1.0 mm |
mm/min |
ISO 3795 |
passed |
| Flash ignition temperature |
|
°C |
ASTM D1929 |
480 |
| Self ignition temperature |
|
°C |
ASTM D1929 |
550 |
Electrical properties (23 °C/50 % r. h.)
| Relative permittivity |
100 Hz |
– |
IEC 60250 |
3.1 |
| Relative permittivity |
1 MHz |
– |
IEC 60250 |
3.0 |
| Dissipation factor |
100 Hz |
10-4 |
IEC 60250 |
5 |
| Dissipation factor |
1 MHz |
10-4 |
IEC 60250 |
90 |
| Volume resistivity |
|
Ohm·m |
IEC 60093 |
1E14 |
| Surface resistivity |
|
Ohm |
IEC 60093 |
1E16 |
| Electrical strength |
1 mm |
kV/mm |
IEC 60243-1 |
34 |
| Comparative tracking index CTI |
Solution A |
Rating |
IEC 60112 |
250 |
| Comparative tracking index CTI M |
Solution B |
Rating |
IEC 60112 |
125M |
| Electrolytic corrosion |
|
Rating |
IEC 60426 |
A1 |
| Water absorption (saturation value) |
Water at 23 °C |
% |
ISO 62 |
0.30 |
| Water absorption (equilibrium value) |
23 °C; 50 % r. h. |
% |
ISO 62 |
0.12 |
| Density |
|
kg/m³ |
ISO 1183-1 |
1200 |
| Water vapor permeability |
23 °C; 85 % RH; 100 µm film |
g/(m²·24 h) |
ISO 15106-1 |
15 |
| Gas permeation |
Oxygen; 100 µm film |
cm³/(m²·24 h·bar) |
b.o. ISO 2556 |
650 |
| Gas permeation |
Oxygen; 25.4 µm (1 mil) film |
cm³/(m²·24 h·bar) |
b.o. ISO 2556 |
2760 |
| Gas permeation |
Nitrogen; 100 µm film |
cm³/(m²·24 h·bar) |
b.o. ISO 2556 |
120 |
| Gas permeation |
Nitrogen; 25.4 µm (1 mil) film |
cm³/(m²·24 h·bar) |
b.o. ISO 2556 |
510 |
| Gas permeation |
Carbon dioxide; 100 µm film |
cm³/(m²·24 h·bar) |
b.o. ISO 2556 |
3800 |
| Gas permeation |
Carbon dioxide; 25.4 µm (1 mil) film |
cm³/(m²·24 h·bar) |
b.o. ISO 2556 |
16900 |
| Bulk density |
Pellets |
kg/m³ |
ISO 60 |
660 |
Material specific properties
| Refractive index |
Procedure A |
– |
ISO 489 |
1.586 |
| Haze for transparent materials |
3 mm |
% |
ISO 14782 |
< 0.8 |
| Luminous transmittance (clear transparent materials) |
1 mm |
% |
ISO 13468-2 |
89 |
| Luminous transmittance (clear transparent materials) |
2 mm |
% |
ISO 13468-2 |
89 |
| Luminous transmittance (clear transparent materials) |
3 mm |
% |
ISO 13468-2 |
88 |
| Luminous transmittance (clear transparent materials) |
4 mm |
% |
ISO 13468-2 |
87 |
Processing conditions for test specimens
| Injection molding-Melt temperature |
|
°C |
ISO 294 |
300 |
| Injection molding-Mold temperature |
|
°C |
ISO 294 |
80 |
| Injection molding-Injection velocity |
|
mm/s |
ISO 294 |
200 |
There are no reviews yet.