NYLON-ASIA FIBRE-2001
@ Plastic Dealer Ask owner
| TYPICAL PROPERTIES of EXTRUDED NYLONS | ||||
| ASTM or UL
test |
Property |
Nylon
6/6 Unfilled |
Nylatron GS
Moly-Filled 6/6 |
Nylon
6/6 30% Glass |
| PHYSICAL | ||||
| D792 | Density (lb/in³) (g/cm³) | 0.042
1.15 |
0.042
1.16 |
0.049
1.35 |
| D570 | Water Absorption, 24 hrs (%) Saturation (%) | 0.3
7.0 |
0.3
7.0 |
0.7
5.4 |
| MECHANICAL | ||||
| D638 | Tensile Strength (psi) | 11,500 | 12,500 | 27,000 |
| D638 | Tensile Modulus (psi) | 425,000 | 480,000 | 1,400,000 |
| D638 | Tensile Elongation at Break (%) | 50 | 25 | 3 |
| D790 | Flexural Strength (psi) | 15,000 | 17,000 | 39,000 |
| D790 | Flexural Modulus (psi) | 450,000 | 460,000 | 1,200,000 |
| D695 | Compressive Strength (psi) | 12,500 | 16,000 | – |
| D695 | Compressive Modulus (psi) | 420,000 | 420,000 | – |
| D785 | Hardness, Rockwell R | M85 / R115 | M85 / R115 | M101 |
| D256 | IZOD Notched Impact (ft-lb/in) | 0.6 | 0.5 | 2.1 |
| THERMAL | ||||
|
D696 |
Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F) |
5.5 |
4.0 |
1.2 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi | 200 / 93 | 200 / 93 | 482 / 250 |
| D3418 | Melting Temperature (°F / °C) | 500 / 260 | 500 / 260 | 491 / 255 |
| – | Max Operating Temp (°F / °C) | 210 / 99 | 220 / 104 | 230 / 110 |
|
C177 |
Thermal Conductivity (BTU-in/ft²-hr-°F)
(x 10-4 cal/cm-sec-°C) |
1.7 5.9 |
1.7 5.9 |
1.7 5.9 |
| UL94 | Flammability Rating | V-2 | V-2 | HB |
| ELECTRICAL | ||||
| D149 | Dielectric Strength (V/mil) short time,
1/8″ thick |
400 | 350 | 530 |
| D150 | Dielectric Constant at 60 Hz | 3.6 | – | 3.5 |
| D150 | Dissipation Factor at 60 Hz | 0.02 | – | 0.02 |
| D257 | Volume Resistivity (ohm-cm) at 73°F,
50% RH |
> 1013 | > 1013 | 1015 |
Specification: NYLON-ASIA FIBRE-2001
|
User Reviews
Be the first to review “NYLON-ASIA FIBRE-2001”
Vendor Information
- No ratings found yet!
There are no reviews yet.