Product Description
Purell PE 1840 H is a low density polyethylene with good flexibility and delivered in pellet form. It is used by our customers mainly for small blow moulding of healthcare applications such as ampoules but also be used in film applications and injection moulding.
Product Characteristics
Status Commercial: Active
Test Method used ISO ASTM
Availability Europe, North America, Asia-Pacific, Australia/NZ, Africa-Middle East, Latin America
Processing Method Injection Blow Molding, Blown Film, Injection Molding, Blow, Fill, & Seal, Extrusion Blow Molding
Features Good Flexibility, Ethyleneoxide sterilisation
Typical Customer Applications
Medical Film, Blow-fill-seal applications, Bottles and vials, Collapsible Tubes (Healthcare), Healthcare Applications
| Typical Properties | Method | Value | Unit |
| Physical | |||
| Density | ISO 1183 | 0.919 | g/cm³ |
| Melt flow rate (MFR) (190°C/2.16kg) | ISO 1133 | 1.5 | g/10 min |
| Mechanical | |||
| Tensile Modulus (23 °C) | ISO 527-1, -2 | 200 | MPa |
| Tensile Stress at Yield (23 °C) | ISO 527-1, -2 | 9.00 | MPa |
| Tensile Strain at Yield | ISO 527-1, -2 | 15 | % |
| Tensile Strength
Note: TD |
ISO 527-1, -3 |
17.0
27.0 |
MPa MPa |
| Note: MD | |||
| Tensile Strain at Break
Note: TD |
ISO 527-1, -3 |
600
200 |
%
% |
| Note: MD | |||
| Hardness | |||
| Shore hardness (Shore D) | ISO 868 | 45 |
Specification: LD BLOW-BASELL-1840H
|
There are no reviews yet.