ABS MOULDING-LG-XR404
@ Plastic Dealer Ask owner
| Physical Properties | Original Value | Comments | |
|---|---|---|---|
| Specific Gravity | 1.05 g/cc | ASTM D792 | |
| Maximum Moisture Content | 0.010 | Injection Molding | |
| Linear Mold Shrinkage, Flow | 0.0040 – 0.0070 cm/cm @Thickness 3.20 mm |
ASTM D955 | |
| Melt Flow | 7.0 g/10 min @Load 10.0 kg, Temperature 220 °C |
ASTM D1238 | |
| Mechanical Properties | Original Value | Comments | |
| Hardness, Rockwell R | 108 | ASTM D785 | |
| Tensile Strength, Yield | 490 kg(f)/cm² @Thickness 3.20 mm |
50 mm/min; ASTM D638 | |
| Elongation at Break | 25 % @Thickness 3.20 mm |
50 mm/min; ASTM D638 | |
| Flexural Yield Strength | 790 kg(f)/cm² @Thickness 3.20 mm |
15 mm/min; ASTM D790 | |
| Flexural Modulus | 26000 kg(f)/cm² @Thickness 3.20 mm |
15 mm/min; ASTM D790 | |
| Izod Impact, Notched | 20.0 kg-cm/cm @Thickness 6.40 mm, Temperature 23.0 °C |
ASTM D256 | |
| 22.0 kg-cm/cm @Thickness 3.20 mm, Temperature 23.0 °C |
ASTM D256 | ||
| Izod Impact, Unnotched | 6.00 kg-cm/cm @Thickness 6.40 mm, Temperature -30.0 °C |
ASTM D256 | |
| 7.00 kg-cm/cm @Thickness 3.20 mm, Temperature -30.0 °C |
ASTM D256 | ||
| Electrical Properties | Original Value | Comments | |
| Volume Resistivity | 1.00e+15 ohm-cm | ASTM D257 | |
| Dielectric Strength | 33.0 kV/mm @Thickness 1.00 mm |
ASTM D149 | |
| Arc Resistance | 60 – 120 sec | ASTM D495 | |
| Comparative Tracking Index | >= 600 V | Solution A; IEC 60112 | |
| Hot Wire Ignition, HWI | 7.0 – 15 sec @Thickness >=1.50 mm |
||
| 15 – 30 sec @Thickness >=3.00 mm |
|||
| High Amp Arc Ignition, HAI | 60 – 120 arcs @Thickness 1.50 mm |
||
| >= 120 arcs @Thickness 3.00 mm |
|||
| High Voltage Arc-Tracking Rate, HVTR | 25.4 – 50.0 mm/min | ||
| Thermal Properties | Original Value | Comments | |
| Deflection Temperature at 0.46 MPa (66 psi) | 108 °C @Thickness 6.40 mm |
Unannealed; ASTM D648 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 100 °C @Thickness 6.40 mm |
Unannealed; ASTM D648 | |
| Vicat Softening Point | 108 °C @Load 5.00 kg |
50°C/h; ASTM D1525 | |
| UL RTI, Electrical | 60.0 °C @Thickness >=1.50 mm |
UL 746B | |
| 60.0 °C @Thickness >=3.00 mm |
UL 746B | ||
| UL RTI, Mechanical with Impact | 60.0 °C @Thickness >=1.50 mm |
UL 746B | |
| 60.0 °C @Thickness >=3.00 mm |
UL 746B | ||
| UL RTI, Mechanical without Impact | 60.0 °C @Thickness >=1.50 mm |
UL 746B | |
| 60.0 °C @Thickness >=3.00 mm |
UL 746B | ||
| Flammability, UL94 | HB @Thickness >=1.50 mm |
||
| HB @Thickness >=3.00 mm |
|||
| Processing Properties | Original Value | Comments | |
| Rear Barrel Temperature | 180 – 210 °C | Injection Molding | |
| Middle Barrel Temperature | 210 – 230 °C | Injection Molding | |
| Front Barrel Temperature | 230 – 240 °C | Injection Molding | |
| Nozzle Temperature | 230 – 240 °C | Injection Molding | |
| Melt Temperature | 220 – 240 °C | Injection Molding | |
| Mold Temperature | 40.0 – 60.0 °C | Injection Molding | |
| Drying Temperature | 80.0 – 90.0 °C | Injection Molding | |
| Dry Time | 3.00 – 4.00 hour | Injection Molding | |
| Back Pressure | 29.4 – 58.8 MPa | Injection Molding | |
| Screw Speed | 50 – 100 rpm | Injection Molding | |
Specification: ABS MOULDING-LG-XR404
|
There are no reviews yet.