PP-CP-BASELL-EP400M
Product Description
Moplen EP400M is a polypropylene impact copolymer with optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage, good weld strength in battery casing. Typical applications include moulding of parts for electrical appliances, containers, battery casing.
Regulatory Status
For regulatory compliance information, see Moplen EP400M Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS).
Status Commercial: Restricted
Availability Africa-Middle East; Asia-Pacific; Australia and New Zealand Application Appliances; Battery Cases; Containers
Market Consumer Products; Electrical / Electronics; Rigid Packaging Processing Method Injection Molding
Attribute Good Impact Resistance; Good Stiffness; Impact Copolymer; Low Warpage
|
Typical Properties |
Nominal
Value |
Units |
Test Method |
| Physical | |||
| Melt Flow Rate, (230 °C/2.16 kg) | 9 | g/10 min | ASTM D1238 |
| Density | 0.90 | g/cm³ | ASTM D792 |
| Mechanical | |||
| Flexural Modulus | 1100 | MPa | ASTM D790 |
| Tensile Strength at Yield | 27 | MPa | ASTM D638 |
| Tensile Elongation at Yield | 6 | % | ASTM D638 |
| Impact
Notched Izod Impact Strength |
|||
| (23 °C) | 150 | J/m | ASTM D256 |
| (-20 °C) | 60 | J/m | ASTM D256 |
| Hardness | |||
| Rockwell Hardness, (R-Scale) | 90 | ASTM D785 | |
| Thermal | |||
| Vicat Softening Point | 150 | °C | ASTM D1525 |
| Deflection Temperature Under Load, (0.46 N/mm²) | 100 | °C | ASTM D648 |
Specification: PP-CP-BASELL-EP400M
|
There are no reviews yet.