Pixel ID: 1720849011656943

PC MOULDING-COVESTRO-2407

Add to compare
Sold by
@ Plastic Dealer

Report Abuse
SKU: PC MOULDING-COVESTRO-2407 Categories: , Tags: , , , , ,

Rheological properties

Property

Melt volume-flow rate

Test Condition

300 °C; 1.2 kg

Unit

cm³/10 min

 Standard

ISO 1133

typical Value

19

Molding shrinkage, parallel 60x60x2 mm; 500 bar % ISO 294-4 0.65
Molding shrinkage, normal 60x60x2 mm; 500 bar % ISO 294-4 0.7
Molding shrinkage, parallel/normal Value range based on general

practical experience

% b.o. ISO 2577 0.5 – 0.7
Melt mass-flow rate 300 °C; 1.2 kg g/10 min ISO 1133 20

Mechanical properties (23 °C/50 % r. h.)

Tensile modulus 1 mm/min MPa ISO 527-1,-2 2400
Yield stress 50 mm/min MPa ISO 527-1,-2 66
Yield strain 50 mm/min % ISO 527-1,-2 6.0
Nominal strain at break 50 mm/min % ISO 527-1,-2 > 50
Stress at break 50 mm/min MPa ISO 527-1,-2 65
Strain at break 50 mm/min % b.o. ISO 527-1,-2 120
Tensile creep modulus 1 h MPa ISO 899-1 2200
Tensile creep modulus 1000 h MPa ISO 899-1 1900
Flexural modulus 2 mm/min MPa ISO 178 2350
Flexural strength 2 mm/min MPa ISO 178 98
Flexural strain at flexural strength 2 mm/min % ISO 178 7.0
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178 74
Charpy impact strength 23 °C kJ/m² ISO 179-1eU N
Charpy impact strength -30 °C kJ/m² ISO 179-1eU N
Charpy impact strength -60 °C kJ/m² ISO 179-1eU N
Charpy notched impact strength 23 °C; 3 mm kJ/m² ISO 7391/b.o. ISO

179-1eA

65P(C)
Charpy notched impact strength -30 °C; 3 mm kJ/m² ISO 7391/b.o. ISO

179-1eA

14C
Izod notched impact strength 23 °C; 3 mm kJ/m² ISO 7391/b.o. ISO 180-A 65P
Izod notched impact strength -30 °C; 3 mm kJ/m² ISO 7391/b.o. ISO 180-A 12C
Puncture maximum force 23 °C N ISO 6603-2 5100
Puncture maximum force -30 °C N ISO 6603-2 6000
Puncture energy 23 °C J ISO 6603-2 55
Puncture energy -30 °C J ISO 6603-2 65
Ball indentation hardness   N/mm² ISO 2039-1 116

Specification: PC MOULDING-COVESTRO-2407

ALPHA

C

Group

PC

Class

PC MOULDING

GRADE

2407

MFI

19

PROCESS

MOULDING

Country

Germany

Tds-Name

MDS_Makrolon_2407_ISO_en.pdf

Tds-Url

https://sourcechatapp-media.s3.ap-south-1.amazonaws.com/609a2bb51f85b70422c05ddc/MDS_Makrolon_2407_ISO_en.pdf

D-Type

S

Brand

C>COVESTRO

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “PC MOULDING-COVESTRO-2407”

Your email address will not be published. Required fields are marked *

Product Enquiry

Plastic Dealers
Logo
Reset Password
Compare items
  • Total (0)
Compare
0
Shopping cart