Product Information
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
| General information | Value | Unit | Test Standard |
| Resin Identification | PA66-GF30 | – | ISO 1043 |
| Part Marking Code | PA66-GF30 | – | ISO 11469 |
| Rheological properties | dry / cond | Unit | Test Standard |
| Moulding shrinkage, parallel | 0.3 / – | % | ISO 294-4, 2577 |
| Moulding shrinkage, normal | 1.1 / – | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile Modulus | 10000 / 7000 | MPa | ISO 527-1/-2 |
| Stress at break | 190 / 120 | MPa | ISO 527-1/-2 |
| Strain at break | 3 / 4.5 | % | ISO 527-1/-2 |
| Flexural Modulus | 9000 / – | MPa | ISO 178 |
| Poisson’s ratio | 0.34 / 0.35 | – | ISO 527-1/-2 |
| Tensile creep modulus
1h |
* / 6800 |
MPa |
ISO 899-1 |
| 1000h | * / 5100 | MPa | |
| Charpy impact strength
23°C |
75 / 80 |
kJ/m² |
ISO 179/1eU |
| -30°C | 70 / 70 | kJ/m² | |
| Charpy notched impact strength
23°C |
10 / 12 |
kJ/m² |
ISO 179/1eA |
| -30°C | 9 / 9 | kJ/m² | |
| Puncture – maximum force, 23°C | 970 / – | N | ISO 6603-2 |
| Puncture energy, 23°C | 4.5 / – | J | ISO 6603-2 |
| Izod notched impact strength
23°C |
10 / 12 |
kJ/m² |
ISO 180/1A |
| -40°C | 7 / – | kJ/m² | |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 263 / * | °C | ISO 11357-1/-3 |
| Glass transition temperature, 10°C/min | 80 / 20 | °C | ISO 11357-1/-2 |
| Temp. of deflection under load
1.8 MPa |
250 / * |
°C |
ISO 75-1/-2 |
| 0.45 MPa | 258 / * | °C | |
| Vicat softening temperature, 50°C/h, 50N | 250 / * | °C | ISO 306 |
| Thermal conductivity solid | 0.36 | W/(m K) | – |
| Thermal conductivity of melt | 0.21 | W/(m K) | – |
| Spec. heat capacity of melt | 2290 | J/(kg K) | – |
| Eff. thermal diffusivity | 7E-8 | m²/s | – |
Specification: NYLON-Dupont-70G30HSLBK039B
|
User Reviews
Be the first to review “NYLON-Dupont-70G30HSLBK039B”
Vendor Information
- No ratings found yet!
There are no reviews yet.