TPE-PolyOne-GLS Versaflex 6240
Versaflex™ OM 6240-1 is specifically designed to bond to a variety of standard and modified nylon materials, including those which are glass-filled, heat stabilized and/or impact modified.
- Exceptional Colorability
- Outstanding Adhesion in Two-Shot Molding Processes
- Soft, Rubbery Grip
- Very Easy to Process
| Physical | Typical Value (English) | Typical Value (SI) | Test Method |
| Specific Gravity | 1.09 | 1.09 | ASTM D792 |
| Molding Shrinkage – Flow | 0.019 to 0.026 in/in | 1.9 to 2.6 % | ASTM D955 |
| Elastomers | Typical Value (English) | Typical Value (SI) | Test Method |
| Tensile | 150 psi | 1.03 MPa | ASTM D412 |
| Tensile | 243 psi | 1.68 MPa | ASTM D412 |
| Tensile Strength 2, 3 | (Break, 73°F (23°C)) 285 psi | 1.97 MPa | ASTM D412 |
| Tensile Elongation 2, 3 | (Break, 73°F (23°C)) 510 % | 510% | ASTM D412 |
| Tear Strength | 90.0 lbf/in | 15.8 kN/m | ASTM D624 |
| Compression Set (73°F (23°C), 22 hr) | 22% | 22% | ASTM D395B |
| Hardness | Typical Value (English) | Typical Value (SI) | Test Method |
| Durometer Hardness
Shore A, 10 sec, 73°F (23°C) |
43 |
43 |
ASTM D2240 |
| Fill Analysis | Typical Value (English) | Typical Value (SI) | Test Method |
| Apparent Viscosity
392°F (200°C), 11200 sec^-1 |
31.3 Pa·s |
31.3 Pa·s |
ASTM D3835 |
Specification: TPE-PolyOne-GLS Versaflex 6240
|
There are no reviews yet.