PROPERTIES & AVERAGE VALUES OF INJECTION
PERMANENCE |
MOLDED SPECIMENS
English |
SI Metric |
ASTM TEST |
Specific Gravity | 0.99 | 0.99 | D 792 |
Molding Shrinkage
1/8 in (3.2 mm) section |
0.0100 – 0.0200 in/in | 1.00 – 2.00 % | D 955 |
MECHANICAL | |||
Tensile Strength | 600 psi | 4 MPa | D 412 |
Tensile Elongation | > 300.0 % | > 300.0 % | D 412 |
Hardness
Shore A, 10 s delay |
70 | 70 | D 2240 |
ELECTRICAL | |||
Volume Resistivity | 1E8 – 1E11 ohm.cm | 1E8 – 1E11 ohm.cm | D 257 |
Surface Resistivit | 1E9 – 1E12 ohm/sq | 1E9 – 1E12 ohm/sq | D 257 ESD STM11.11 |
PROPERTY NOTES |
GENERAL PROCESSING FOR INJECTION MOLDING | English | SI Metric |
Injection Pressure | 5000 – 10000 psi | 34 – 69 MPa |
Melt Temperature | 360 – 400 °F | 182 – 204 °C |
Mold Temperature | 60 – 150 °F | 16 – 66 °C |
Drying | 2 hrs @ 175 °F | 2 hrs @ 79 °C |
Moisture Content | 0.03 % | 0.03 % |
Dew Point | 0 °F | -18 °C |
PROCESSING NOTES | ||
Do not exceed 520 °F (270 °C) melt temperature. |
Specification: TEO-RTP-PERMASTAT 2800-70A PMS
|
User Reviews
Be the first to review “TEO-RTP-PERMASTAT 2800-70A PMS”
Vendor Information
- No ratings found yet!
There are no reviews yet.