Material Notes:
The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(1)(i) and (c)1.1a. The adjuvants meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use.Applications: Extrusion coating on fabrics woven, thin walled molded articles.Advantages: Low neck in. High temperature resistance. Good resistance to pin-holing. High gloss and surface hardness.
Abrasion resistance. Excellent moisture barriers. Excellent grease and chemical resistance. Low odor and taste. Fabrication: Equipment – general extrusion or injection molding machines. Techniques – standard processing. Information provided by Titan ChemicalsCAS# 9003- 07-0
Physical Properties | Metric | English | Comments |
Base Resin Density | 0.900 g/cc | 0.0325 lb/in³ | ASTM D1505 |
Water Absorption | 0.020 % | 0.020 % | after 24 hrs; ASTM D570 |
Base Resin Melt Index |
30 g/10 min
@Temperature 230 °C |
30 g/10 min
@Temperature 446 °F |
ASTM D1238 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 98 | 98 | ASTM D785A |
Tensile Strength, Yield | 31.4 MPa | 4550 psi | ASTM D638 |
Elongation at Yield | 12 % | 12 % | ASTM D638 |
Flexural Modulus | 1.32 GPa | 191 ksi | ASTM D790B |
Izod Impact, Notched | 0.324 J/cm | 0.607 ft-lb/in | ASTM D256A |
Thermal Properties | Metric | English | Comments |
Deflection Temperature at 0.46 MPa (66 psi) | 90.0 °C | 194 °F |
ASTM D648 |
Specification: PP LAMINATION-TITAN-PD701
|
There are no reviews yet.