Product Description
- LD750-EC is a broad molecular weight distribution homopolymer designed to offer good impact strength and crack resistance and has excellent It has good processability over a wide range of molding conditions.
- LD750-EC may be used in both extrusion coating and injection molding applications. LD750-EC is intended for use in flexible packaging and paperboard coating applications and provides a good balance of neck in and drawdown When used in injection molding applications LD750-EC provides a good balance of softness and toughness for applications including housewares and containers.
- LD750-EC meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520 (c) 2.2. This regulation allows the use of this olefin polymer in “…articles or components of articles intended for use in contact with ” Specific limitations may apply. Contact your Osterman sales representative for more information.
- Specific recommendations for processing LD750-EC can only be made when the processing conditions, equipment and end use are For further suggestions, please contact your Osterman sales representative.
| Physical | Nominal Value | Unit | Test Method |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Elongation (Yield) | 10 | % | ASTM D638 |
| Tensile Elongation (Break) | 550 | % | ASTM D638 |
| Flexural Modulus – 1% Secant | 30000 | psi | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
| Vicat Softening Temperature | 186 | °F | ASTM D1525 |
Specification: LD LAMINATION-OSTERLENE-LD750
|
There are no reviews yet.