ABS MOULDING TX-0510 LOTTE granuals Delhi plastic Dealer

ABS MOULDING-LOTTE-TX-0510

Add to compare

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity (Natural)	1.10	g/cm³	ASTM D792
Density (Natural)	1.10	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)	16	g/10 min	ASTM D1238
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)	16	g/10 min	ISO 1133
Molding Shrinkage – Flow (3.20 mm)	0.43 to 0.52	%	ASTM D955
Molding Shrinkage – Across Flow (3.20 mm)	0.44 to 0.54	%	ASTM D955
Molding Shrinkage Across Flow : 2.00 mm	0.44 to 0.54	%	ISO 294-4
Flow : 2.00 mm	0.43 to 0.52	%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ²	2000	MPa	ASTM D638
Tensile Strength ² (Yield)	44.0	MPa	ASTM D638
Tensile Stress (Yield)	47.0	MPa	ISO 527-2/50
Tensile Strength ² (Break)	32.0	MPa	ASTM D638
Tensile Elongation ² (Break)	19	%	ASTM D638
Flexural Modulus ³	2100	MPa	ASTM D790
Flexural Modulus ⁴	2200	MPa	ISO 178
Flexural Strength ³	64.0	MPa	ASTM D790
Flexural Stress ⁴	70.0	MPa	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength ⁵ (23°C)	13	kJ/m²	ISO 179/1eA
Notched Izod Impact 23°C, 3.18 mm	150	J/m	ASTM D256
23°C, 6.35 mm	150	J/m
Notched Izod Impact Strength ⁵ (23°C)	12	kJ/m²	ISO 180/1A
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	109		ASTM D785
Rockwell Hardness (R-Scale)	110		ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load 1.8 MPa, Unannealed, 6.40 mm	78.0	°C	ASTM D648
Vicat Softening Temperature	88.0	°C	ISO 306/B50